|
|
This window is to prepare the various output files generated by STADIUM®. The user must first select the output frequency (step) to be written in the .out.xls file. For instance, if the user assigns a 10 years value to this parameter, the main variables values will be written in the file at every 10 years: 10, 20, 30, … n years.
Figure 29 – Printing Options window
A low frequency is recommended to avoid the aliasing phenomena.
Figure 30 – Corrosion Options window
• The window presented in Figure 30 illustrates how to prepare the output files where the corrosion results are to be written. Again, select a frequency for the results to be written to the output files cl_tot.xls and cl_oh.xls. Next, select the number of rebar positions to be analyzed and enter the position values (in “mm” if the units are in SI metric or “in” if they are in US units). The model then calculates total chloride content and the chloride/hydroxide ratio in the pore solution at each rebar position and at the previously selected frequency.
• A low frequency is recommended to avoid the aliasing phenomena.
Web site: http://www.simcotechnologies.com/
